Submersible Probe
Holders
Applications
- Water Treatment
- Cooling Systems
- Water Treatment
- Swimming Pools
- Drinking Water
- Irrigation
Inline Probe Holders
We offer a range of pH-redox and conductivity inline probe holders specifically designed
for integration into the existing pipework as a simple solution for the precision measurement of the chemical treatment process,
we recommend a bypass sample line with isolation valves before and after the probe holder system providing a practical solution
for calibration and maintenance of the electrodes to ensure optimum measuring conditions and water treatment efficiency.
Electrode Holder
Type PIR
Submersible Probe Holder
Immersion probe holder for tank and open vessel installations can be adapted to any type of industrial
water treatment process applications for depths up to two meters, with excellent impermeability protection against
any water ingress that could compromise the stability of the sensor measurements.
Recommended where possible there
is a reasonable degree circulation locally to the position for the probe holder to allow the electrodes or sensors to provide precise
measurements.
Mounting bracket design allows full height adjustment inside tank and practical removal of probe holder
for calibration and maintenance and replacement of electrodes and sensors.
Technical Features
» Holder Material : - PVC (Polyvinyl Chloride) |
» Holder Lengths :-
0.5mtr-1mtr-1.5mtr-2mtr |
» Probe Holder :- Max operating temp 40°C |
» Mounting bracket
:- Polypropylene |
» Full encapsulated seal around sensors |
» Seal Material :- FKM (Viton
Rubber) |
» Probe Size : - Electrodes Ø 12mm |
» Temperature Rating 0....40°C |
» Electrodes :- pH-Redox-EC |
Electrode Holder
Type PIR-2
Electrode Holder
Type S315-O
Electrode Holder
Type S315-S
Sample Line Probe Holders
We offer a range of pH-redox-chlorine & bromine electrode sample line, bypass and off-line probe holders
specifically designed for integration into water treatment processes the built-in flow switch to signal the control
system to suspend dosing thus protecting against over chemical concentration and ensuring measurements
stay within the desired parameters, once installed the water will always be in contact with the measurement electrode
to ensure optimum measuring conditions and chemical dosing efficiency.
Technical Features
» Holder Material : - PVC (Polyvinyl Chloride) |
» Holder Lengths :-
0.5mtr-1mtr-1.5mtr-2mtr |
» Probe Holder :- Max operating temp 40°C |
» Mounting bracket
:- Flange adjustable |
» Full encapsulated seal around sensors |
» Seal Material :- FKM (Viton
Rubber) |
» Probe Size : - Electrodes Ø 12mm |
» Temperature Rating 0....40°C |
» Electrodes :- pH-Redox-EC |
Immersion Probe Holder
Immersion probe holder with 45° bend to measure dissolved oxygen for tanks and pipe installations
suitable for industrial water treatment, fishing farming and biological treatment processes, with excellent impermeability
protection against any water ingress that could compromise the stability of the sensor measurements.
Recommended
where possible there is a reasonable degree circulation locally to the position for the probe holder to allow the electrodes
or sensors to provide precise measurements.
Submersible Probe Holder
Immersion probe holder for tank and open vessel installations can be adapted to any type of industrial
water treatment process applications for depths up to two meters, with excellent impermeability protection against
any water ingress that could compromise the stability of the sensor measurements.
Recommended where possible there
is a reasonable degree circulation locally to the position for the probe holder to allow the electrodes or sensors to provide precise
measurements.
Mounting flange design with locking mechanism design full height adjustment inside tank and practical
removal of probe holder for calibration and maintenance and replacement of electrodes and sensors.
Technical Features
» Holder Material : - Polypropylene |
» Holder Lengths :- 0.5mtr
- 2.5mtrs |
» Probe Holder :- Max operating temp 80°C |
» Bend 45° :- PVC (Polyvinyl
Chloride) |
» Full encapsulated seal around sensors |
» Seal Material :- FKM (Viton Rubber) |
» Probe Size : - Electrodes Ø 12mm |
» Temperature Rating 0....80°C |
» Sensor :-
Dissolved Oxygen |
Technical Features
» Holder Material : - Polypropylene Shaft |
» Holder Lengths :-
0.5mtr - 2.5mtrs |
» Probe Holder :- Max operating temp 80°C |
» Probe Housing :- 316
Stainless Steel |
» Full encapsulated seal around sensors |
» Seal Material :- FKM (Viton
Rubber) |
» Probe Size : - Electrodes Ø 42mm |
» Temperature Rating 0....80°C |
» Sensors :- Turbidity - Suspended Solids |
Immersion Probe Holder
Immersion probe holder to house turbidity and suspended solids sensors in tanks and
pipe installations suitable for industrial wastewater treatment plants, food, chemical paper industry, extraction plants, fishing
farming and biological treatment processes, with excellent impermeability protection against any water ingress that
could compromise the stability of the sensor measurements.
Recommended where possible there is a reasonable degree circulation
locally to the position for the probe holder to allow the electrodes or sensors to provide precise measurements.
Submersible Probe Holders
Robust pvc probe holders specifically designed for immersion into tanks, open vessels with excellent
impermeability protection against water and liquids that could compromise pH-redox and conductivity sensors readings and maintaining
optimum measurement control in water treatment applications.
Copyright: - Electronic Dosing Systems 2024
| Water Treatment | Electroplating | Cooling Towers | Industrial Boilers | Beverage & Breweries | Vehicle
Washing | Waste Water Treatment | Swimming Pools & Spas |
| Paper Industry | Petroleum | Bottle Washing |
Hygiene & Cleaning | Biotechnology | Food Industry | Pharmaceutical Industry |
| Controllers | Electrodes | Sensors |
Electronic Dosing Systems
Tel 01299 825 656 Email info@electronicdosingsystems.co.uk