Motor- Driven
Piston Metering Pumps
Key Features
- Superior components & robust design
-
- Designed to operate
for long periods
-
- Permanent lubrication with all parts
-
- Aggressive chemicals dosing heads
-
- Reduced overheating motor design
-
- Intelligent Programming
Interface
-
- Remote Programming-Monitoring
Motor-Driven Microprocessor Pumps
- Machanical dosing pumps with groundbreaking multi-parameter digital controller with
web server connectivity offering vast potential in optimising precision in chemical dosing and cost control in
multiple process applications, pumps can be remotely monitored and key parameters adjusted via a pc, tablet or smartphone
providing invaluable real-time and historical statistics from any location in the world.
- Manufactured from materials that
deliver superior robustness chemical compatibility offering extreme accurate metering performance even under fluctuating pressure
conditions, principal moving components feature permanent lubrication designed to prevent overheating with the benefit
of quiet running whilst extending the pumps life.
Motor-Driven Piston Pumps
- Machanical dosing pumps with spring return plunger piston mechanism in aluminium housing
delivering robust repeatable performance offers flexible stroke length and motor speed for superior chemical dosing accuracy
even under fluctuating pressure conditions, the design of the spring return mechanism greatly reduces mechanical stress
throughout the suction-discharge phases with all principal moving components permanently lubricated to preventing motor overheating with
the benefit of quiet running whilst extending the pumps life.
- Multiple chemical resistant dosing heads specifically designed
to handle aggressive chemicals in the most challenging of water treatment processes designed for the demands
of chemical, petroleum, wastewater & gas industries, with extreme accurate metering performance even under fluctuating
pressure conditions whilst providing minimum maintenance requirements and long service life.
Mechanical Diaphragm
Pumps D1-HF Series
(Vacuum Assisted System)
SPRING-RETURN DIAPHRAGM PUMP
WITH ASSISTED VACUUM SYSTEM®
WITH ASSISTED VACUUM SYSTEM®
Technical Features
» Pumps designed using a spring-return
mechanism incorporating a Assisted Vacuum System®
provides a technical solution that helps overcome
the typical functional limitations of pumps
that use a spring return mechanism.
Using the assisted vacuum system mechanism improves pump performance by allowing the
dosing
frequency to be raised (stroke/min) without compromising the diaphragms lifespan.
» The AVS permits D1 HF pumps to reach a flow rate of 1,200 l/h whilst maintaining both
noise and mechanical stress at a reduced level.
Pumps can be configured with two different stroke rates and is supplied with a three-phase
» Rrobust aluminium epoxy finished housing for an effective and reliable dosing performance
with
a broad range of hydraulic and wet-end configurations
» Flow rate range: 450 - 1,200 l/h, up to 4.5 bar
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic |
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic |
Pumps With Modbus WiFi Technology
Dosing pumps and instruments with online cloud platform access across multiple locations worldwide
Motor-Driven Piston
Pumps R2-R Series
SPRING-RETURN PISTON-PLUNGER PUMP
Technical Features
» Pumps offering multiple configurations for pump
heads and motors with higher torque values
incorporating increased piston size and stroke length &
mechanical spring-return mechanism
the versatile hydraulic characteristics permit the pumps
to be adapted in multiple applications.
» Specifically designed pump casing for high pressure applications ensures pump performance
throughout suction-discharge phase helps overcome typical functional limitations of pumps.
» Pumps can
reach flow rates of 1,000 l/h maintaining mechanical stress at a reduced level.
Pumps can be configured
with two different stroke rates and is supplied with a three-phase
» Rrobust aluminium epoxy finished housing for
an effective and reliable dosing performance
with a broad range of hydraulic and wet-end configurations
» Pumps
equipped with three-phase or single-phase motors both with IP55 protection.
» Flow rate range: 40 - 1,000 l/h, up
to 20 bar
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic|
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic|
Motor-Driven Piston
Pumps R1-R Series
SPRING-RETURN PISTON-PLUNGER PUMP
Technical Features
» Pumps offering multiple configurations for pump
heads and motors with higher torque values
incorporating increased piston size and stroke length &
mechanical spring-return mechanism
the versatile hydraulic characteristics permit the pumps
to be adapted in multiple applications.
» Specifically designed pump casing for high pressure applications ensures pump performance
throughout suction-discharge phase helps overcome typical functional limitations of pumps.
» Pumps can reach
flow rates of upto 304 l/h maintaining mechanical stress at a reduced level.
Pumps can be configured
with two different stroke rates and is supplied with a three-phase
» Rrobust aluminium epoxy finished housing for
an effective and reliable dosing performance
with a broad range of hydraulic and wet-end configurations
» Pumps
equipped with three-phase or single-phase motors both with IP55 protection.
» Flow rate range: 1.5 - 304 l/h,
up to 20 bar
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic|
» Wetted parts: | SS316L | PVC | PP | PVDF | PTFE | FPM | EPDM | Ceramic|
SPRING-RETURN PISTON-PLUNGER PUMP
Technical Features
» Pumps for 100 bar high pressure
process applications with high torque 3-phase IP55 motor
incorporating increased piston size
and stroke length & mechanical spring-return mechanism
the versatile hydraulic characteristics permit
the pumps to be adapted in multiple applications.
» Specifically designed pump casing for high pressure
applications ensures pump performance
throughout suction-discharge phase helps overcome typical
functional limitations of pumps.
» Pumps can reach flow rates of up to 12 l/h maintaining mechanical
stress at a reduced level.
Pumps can be configured with two different stroke rates and is supplied with a three-phase
» Rrobust aluminium epoxy finished housing for an effective and reliable dosing performance
Designed for processes requiring small dosing amounts of product at 100 bar pressure.
» Pumps needs
to be with equipped with three-phase motor with IP55 protection.
» Flow rate range: 2.5 - 12 l/h,
up to 100 bar
» Wetted parts: | SS316L | PTFE | NBR (Nitrile Butadiene Rubber) |
» Wetted parts: | SS316L | PTFE | NBR (Nitrile Butadiene Rubber) |
Motor-Driven Piston
Pumps R1-R Series
Copyright: - Electronic Dosing Systems 2024
| Water Treatment | Electroplating | Cooling Towers | Industrial Boilers | Beverage & Breweries | Vehicle
Washing | Waste Water Treatment | Swimming Pools & Spas |
| Paper Industry | Petroleum | Bottle Washing |
Hygiene & Cleaning | Biotechnology | Food Industry | Pharmaceutical Industry |
| Dosing Pumps | Multifunction Pumps | Instrument pH-Redox Pumps | Diaphragm Pumps | Piston Pumps | Mechanical
Digital Pumps |
Electronic Dosing Systems
Tel 01299 825 656 Email info@electronicdosingsystems.co.uk