Conductivity Controllers
Applications
- Wastewater Treatment
- Reverse Osmosis
- Cooling Towers
- Drinking Water
- Irrigation
- Boilers
- Dairy
Proportional Conductivity Control
- Pulse Frequency Modulation the set-point relays generates pulses to proportionally
control our dosing pumps therefore the amount of chemical dosed can be precisely controlled increasing the overall efficiency
and reducing the amount of chemical required to maintain conductivity levels more precisely.
-
- Pulse Width Modulation the
relays active on a start-stop time cycle proportional to the measured pH value in respect to the set point decreasing the relays active
time whilst reaching the desired pH value, this type of proportional control provides a simple yet effective solution when solenoid
valves are being used instead of chemical dosing pumps.
Conductivity Controller Range
- Conductivity controllers and instruments with exceptional measurement precision large
graphic display intuitive navigation menu and extensive monitoring and control functions maintain conductivity
levels within specific boundaries, controllers can be used either as a stand alone system or integrated into
more complex dosing systems where remote visualization and full programming authority can be accessed.
DC100-B Conductivity Controllers
MT200-CD Conductivity Controllers
Panel Mounting Controller
Characteristics Common To All Controllers
» Auxiliary outputs to drive remote equipment or sensor cleaning »
Time out maximum dosage controlling “Max dosing Time
» Aux programming of days and time operations
» Temperature set point relay when using temperature sensor
» Timer to Start-up and End
unit operations
» Graphic charts and data logger download
» Real-time clock configurable as Timer to drive
controller »
Automatic recognition of measuring parameter
Conductivity Controllers
Housed in a economical enclosure with large self explanatory large intuitive
navigation
display for continuous monitoring of the conductivity (TDS) levels.
Instrument benefits from having standard and advanced
programming menu's
providing enormous flexibly increased control of bleeding in cooling systems
including operating
dosing pumps until the designated conductivity value has
been achieved.
Remote access through websever with full programming
authority.
DC100 Conductivity Controllers
Conductivity Controllers
Instrument with front hinged lid large self explanatory intuitive navigation
display for
continuous monitoring and control of conductivity (TDS) levels.
High specification instrument with extensive operating functions benefiting
from
two levels of programming, standard mode for applications requiring
operating solenoid valves on
cooling systems, the advanced menu provides
additional parameters required in complex water management systems.
»Remote access through websever with full programming authority.
MT400-CD Conductivity Controllers
Conductivity PID Controllers
Advanced instruments designed for high-end applications self explanatory
intuitive navigation
display with graphic output status icons simultaneous
flashing values of conductivity (tds) and temperature
levels respectively.
Instrument benefits from a sensor efficiency system ensuring conductivity
levels are
continuously maintained at all times, configuration of parameters
can be tailored to maximise efficiency in
evaporative cooling and boilers
systems including being integrated into more complex applications.
» Probe efficiency with washing cycle program
» Power supply options: - (12÷32 Vdc or 24 Vac)
Conductivity Controllers
Advanced instruments designed for high-end applications self explanatory
intuitive navigation
display with graphic output status icons simultaneous
flashing values of conductivity (tds) and temperature
levels respectively.
Instrument benefits from a sensor efficiency system ensuring conductivity
levels are
continuously maintained at all times, configuration of parameters
can be tailored to maximise efficiency in
evaporative cooling and boilers
systems including being integrated into more complex applications.
» Probe efficiency with washing cycle program
» Power supply options: - (12÷32 Vdc or 24 Vac)
Technical Features
» Large graphic intelligent navigation display |
» Programming
levels standard or professional |
» Conductivity measurements in micro Siemens |
» Cell (K) factor
ranges selectable by operator |
» Hysteresis - Overdosing - Min/Max Alarm |
» Stabilized universal
100÷240v power supply |
» Set-points with proportional (PWM) control |
» Inputs
level probe - flow - temperature probe |
» 3 x 4÷20mA output for pumps or data logging |
» Dimensions: - 204 x 149 x 85 Enclosure IP56 |
» Temperature sensor input Type : - P100 |
Technical Features
» Large graphic intelligent navigation display |
» Programming
levels standard or professional |
» Conductivity measurements in micro Siemens |
» Cell (K) factor
ranges selectable by operator |
» Hysteresis - Overdosing - Min/Max Alarm |
» Stabilized universal
100÷240v power supply |
» Set-points with proportional (PWM) control |
» Inputs
level probe - flow - temperature probe |
» 3 x 4÷20mA output for pumps or data logging |
» Dimensions: - 231 x 125 x 90 Enclosure IP66 |
» Temperature sensor input Type : - P100 |
Technical Features
» Large graphic intelligent navigation display |
» Programming
levels standard or professional |
» Conductivity measurements in micro Siemens |
» Cell (K) factor
ranges selectable by operator |
» Hysteresis - Overdosing - Min/Max Alarm |
» Stabilized universal
100÷240v power supply |
» Set-points with proportional (PID) control |
» 1 x 4÷20mA
output for pumps or data logging |
» Wall mounting version 144 x 144 x 122 IP66 |
» Panel
mounting version : - 96 x 96 x 42 IP66 |
» Temperature sensor input Type : - P100 |
Technical Features
» Large graphic intelligent navigation display |
» Programming
levels standard or professional |
» Conductivity measurements in micro Siemens |
» Cell (K) factor
ranges selectable by operator |
» Hysteresis - Overdosing - Min/Max Alarm |
» Stabilized universal
100÷240v power supply |
» Set-points with proportional (PWM) control |
» 1 x 4÷20mA
output for pumps or data logging |
» Wall mounting version 144 x 144 x 122 IP66 |
» Panel
mounting version : - 96 x 96 x 42 IP66 |
» Temperature sensor input Type : - P100 |
Copyright: - Electronic Dosing Systems 2024
| Water Treatment | Electroplating | Cooling Towers | Industrial Boilers | Beverage & Breweries | Vehicle
Washing | Waste Water Treatment | Swimming Pools & Spas |
| Paper Industry | Petroleum | Bottle Washing |
Hygiene & Cleaning | Biotechnology | Food Industry | Pharmaceutical Industry |
Electrodes - Probes - Sensors
Electrodes - Probes - Sensors
| PPM measurements
| Bromine Instrument | Chlorine Dioxide instrument | Hydrogen Peroxide instrument | Peracetic Acid instrument | Active oxygen |
Electronic Dosing Systems
Tel 01299 825 656 Email info@electronicdosingsystems.co.uk